Automobile Saboteur With His Hands

The obligated car amateurs must have wanted to get their hands on a car saboopher. Because of a little experience, the project is often delayed each time. To collect the sabruphere destined for the vehicle, there is a need for serious knowledge of electronics, but even little of them are likely to have to be collected for the sabotage of boxes, and without special devices, it is difficult.

To feed the saboufer's head of standard on-board 12 Volts is too small, a converter needs to be assembled. It is the transformer that is the most difficult part of the entire project.

There is no need to forget about the 12-volt microschems, the same TDA2003. Many do not pay much attention to her, but this is a rather good option.

The power of the outlet is approximately 10 Watt, which is clearly insufficient. There is a bridge to connect two similar microschems to obtain a high degree of reinforcement. The Bridge circuit is working with dynamic heads on 4 Om, which is also very important. If it's connected on the bridge circuit, it's allowed up to 24 Watt outlet, and it's beautiful.

With such a booster, it is possible to unload a full head of 25GDN and even more powerful. This surgery scheme is used in the sabvuffers, and I personally made some orders under this scheme some five years ago, and they're still doing excellent work. I would like to point out that the strikes are clearly better than those of the state-owned " twins " .

Mikroschems operate in the AV class. Given the significant output power of the generating force, its thermal intensification is quite large, so it is mandatory to set microchems on the heat discharge without additional insulation because they have a single mass.

The fee is not more than a match box. The industrial specimen is performed on the industrial fee. You can charge a cheap Chinese device.

It's running a pattern right out of the vehicle's on-board network. Despite its small size, the mounter can provide a fairly decent bass in your car, and its assembly is cheap, microschems are worth not more than a dollar, the rest of the elementary base can easily be replicated in the black supplies of a medium-sized radiomate.

The design of a simple low-frequency filter that enters any saboopher should be considered in the future.